Skip to main content

XenServer Support and Certification Matrix

Back to HPE Servers Support & OS Certification Matrices

Table of Contents

Table of Contents

    Welcome to HPE's interactive Citrix XenServer Support and Certification webpage for ProLiant and BladeSystem Servers (x86).


    Please Note:

    Citrix XenServer and Hypervisor are Supported and Certified with in-distro drivers only. All model options and configurations are not necessarily supported. Please contact your HPE representative for more information.


    Just click on the server to obtain driver downloads, certification and support information. HPE recommends that our customers update to the latest service packs and security releases from Citrix.


    HPE is committed to supporting all customers that install the latest services packs and security releases from Citrix.


    Click on the product to obtain product information, downloads, certifications, and documentation.


    Current Products | Archived Products

    Legend

    - HPE Supported

    - HPE Supported & OS Partner Certified/Logo

    T - HPE Tested: Either the OS or hypervisor was successfully installed on the server

    P - Pending HPE support

    🄿 - Partner Certification Pending

    Alletra Series

    Product


    Citrix Hypervisor 8.2 LTSR CU1


    XenServer 8

    64-bit Dom0

    Technical Requirements

    Alletra Storage Server 4110

    Intel® Fourth Generation Xeon® 84xx/64xx/54xx/44xx/34xx Scalable Processors require a minimum of Hypervisor 8.2 LTSR CU1.

    Alletra Storage Server 4120

    Intel® Fourth Generation Xeon® 84xx/64xx/54xx/44xx/34xx Scalable Processors require a minimum of Hypervisor 8.2 LTSR CU1.

    Alletra Storage Server 4140


    BL Series

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    BL460c Gen9

    No CNA adapter support for iSCSI or FCOE, Ethernet only

    BL460c Gen10

    No CNA adapter support for iSCSI or FCOE, Ethernet only

    BL660c Gen9

    No CNA adapter support for iSCSI or FCOE, Ethernet only

    DL Series

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    XenServer 8.4 (formerly XenServer 8) supports Intel® Xeon® 6300 and E-24xx Processors.


    DL325 Gen10

    • AMD EPYC™ 7002 Series Processor Family requires minimum of Hypervisor 8.1
    • AMD EPYC™ 7001 Series Processor Family requires minimum of Hypervisor 8.0

    DL325 Gen10 Plus

    • Hypervisor 8.1 is the required minimum version for this server
    • AMD EPYC™ 7002 Series Processor Family requires minimum of Hypervisor 8.1

    • AMD EPYC™ 9004 Series Processors require a minimum of Hypervisor 8.2 LTSR CU1
    • AMD EPYC™ 9005 Series Processors require a minimum of XenServer 8 and installation ISO dated December 9, 2024 or later. If you have installed XenServer 8 on an AMD EPYC™ 9005 Series processor host using an earlier installation, you must install the latest XenServer updates to ensure a supportable environment.

    DL325 v2 Gen10 Plus

    Hypervisor 8.2 is the required minimum version for this server

    • AMD EPYC™ 9004 Series Processors require a minimum of Hypervisor 8.2 LTSR CU1
    • AMD EPYC™ 9005 Series Processors require a minimum of XenServer 8 and installation ISO dated December 9, 2024 or later. If you have installed XenServer 8 on an AMD EPYC™ 9005 Series processor host using an earlier installation, you must install the latest XenServer updates to ensure a supportable environment.

    DL360 Gen9

    certified with Hypervisor 8.2

    DL360 Gen10


    DL360 Gen10 Plus


    • Intel® Fourth Generation Xeon® 84xx/64xx/54xx/44xx/34xx Scalable Processors require a minimum of Hypervisor 8.2 LTSR CU1.
    • Servers with 4 or more sockets, require Hypervisor 8.2 LTSR CU1 using an installation ISO released after Jun 1, 2023.
    • Requires HPE BIOS Version: 1.40_06-29-2023 (20 Jul 2023) or later. +

    DL365 Gen10 Plus

    Hypervisor 8.2 is the required minimum version for this server

    • AMD EPYC™ 9004 Series Processors require a minimum of Hypervisor 8.2 LTSR CU1
    • AMD EPYC™ 9005 Series Processors require a minimum of XenServer 8 and installation ISO dated December 9, 2024 or later. If you have installed XenServer 8 on an AMD EPYC™ 9005 Series processor host using an earlier installation, you must install the latest XenServer updates to ensure a supportable environment.

    DL380 Gen9


    DL380 Gen10


    DL380 Gen10 Plus


    • Intel® Fourth Generation Xeon® 84xx/64xx/54xx/44xx/34xx Scalable Processors require a minimum of Hypervisor 8.2 LTSR CU1.
    • Servers with 4 or more sockets, require Hypervisor 8.2 LTSR CU1 using an installation ISO released after Jun 1, 2023.
    • Requires HPE BIOS Version: 1.40_06-29-2023 (20 Jul 2023) or later.

    DL385 Gen10

    • AMD EPYC™ 7002 Series Processor Family requires minimum of Hypervisor 8.1
    • AMD EPYC™ 7001 Series Processor Family requires minimum of Hypervisor 8.0

    DL385 Gen10 Plus

    • Hypervisor 8.1 is the required minimum version for this server
    • AMD EPYC™ 7002 Series Processor Family requires minimum of Hypervisor 8.1

    • AMD EPYC™ 9004 Series Processors require a minimum of Hypervisor 8.2 LTSR CU1
    • AMD EPYC™ 9005 Series Processors require a minimum of XenServer 8 and installation ISO dated December 9, 2024 or later. If you have installed XenServer 8 on an AMD EPYC™ 9005 Series processor host using an earlier installation, you must install the latest XenServer updates to ensure a supportable environment.

    DL385 v2 Gen10 Plus

    Hypervisor 8.2 is the required minimum version for this server

    DL560 Gen10



    DL580 Gen10


    Edgeline

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    m510 Server Cartridge


    m710x Server Cartridge


    ML & MicroServer

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    MicroServer Gen11

    XenServer 8.4 (formerly XenServer 8) supports Intel® Xeon® 6300 and E-24xx Processors.

    ML30 Gen11

    XenServer 8.4 (formerly XenServer 8) supports Intel® Xeon® 6300 and E-24xx Processors.

    ML350 Gen11


    • Intel® Fourth Generation Xeon® 84xx/64xx/54xx/44xx/34xx Scalable Processors require a minimum of Hypervisor 8.2 LTSR CU1.
    • Servers with 4 or more sockets, require Hypervisor 8.2 LTSR CU1 using an installation ISO released after Jun 1, 2023.
    • Requires HPE BIOS Version: 1.40_06-29-2023 (20 Jul 2023) or later.

    Synergy

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    480 Gen10

    No CNA adapter support for iSCSI or FCOE, Ethernet only

    660 Gen10

    No CNA adapter support for iSCSI or FCOE, Ethernet only

    Product

    Citrix XenServer 8.4


    64-bit Dom0

    Technical Requirements

    Support starts with XenServer 8.4

    Supported as Ethernet only with HPE Synergy 6310C 25/50Gb Ethernet Adapter

    No CNA adapter support


    Support starts with XenServer 8.4

    Supported as Ethernet only with HPE Synergy 6310C 25/50Gb Ethernet Adapter

    No CNA adapter support


    XL Series (Apollo Family)

    Product


    Citrix Hypervisor 8.2 LTSR CU1

    XenServer 8


    64-bit Dom0

    Technical Requirements

    XL170r Gen9 (Apollo 2000)


    XL170r Gen10 (Apollo 2000)


    XL190r Gen10 (Apollo 2000)


    • AMD EPYC™ 7002 Series Processor Family requires minimum of Hypervisor 8.1
    • AMD EPYC™ 7003 Series Processor Family requires a minimum of Hypervisor 8.2

    XL420 Gen10 Plus (Apollo 4200)


    Recommended for you