QuickSpecs
HPE ProLiant DL380 Gen11 - Carrier Grade Supplement QuickSpecs
Table of Contents
NEBS Level 3 and ETSI Certified
This section lists some of the steps required to configure a Factory Integrated Model compliant with typically requested telecom carrier NEBS and ETSI requirements.
Overview
HPE ProLiant DL380 Gen11 - Carrier Grade Supplement
In addition to the worldwide compliance criteria applied to the commercial version of the product, all components listed in this document have been evaluated to the following criteria: SR-3580, Level 3, NEBS Criteria Levels
- - GR-1089-CORE, EMC and Electrical Safety
- - GR-63-CORE, Physical Protections
- - GR-3108-CORE Outside Plant
- - ETSI EN 300 386, Class A, EMC
- - ETSI EN 300 019-2-1, Class 1.2, Storage
- - ETSI EN 300 019-2-2, Class 2.3, Transportation
- - ETSI EN 300 019-2-3, Class 3.1 & 3.1E, Stationary use at weather protected locations
- - ETSI 300 132, Power supply interface to telecom equipment, -48VDC
- - ETSI ETS 300 753, Acoustic noise
To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
Factory Integrated Models must start with a CTO Server. FIO indicates factory-only installation availability. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Notes:
- To yield a carrier grade server that is compliant with all the required technical criteria, the product content is limited to what is listed in this document. In addition to this, the system maintenance switch #10 must be turned to the "ON" position to enable the expanded operating temperature range and hardware from the following kits MUST be installed:
- HPE ProLiant DL380/DL560 Gen11 High Performance 2U Heat Sink Kit (P48818-B21)
- HPE ProLiant DL380/DL560 Gen11 2U High Performance Fan Kit (P48820-B21)
- HPE ProLiant DL380 Gen11 2U Primary/Secondary NEBS-compliant Riser Kit (P48805-B21)
- HPE ProLiant DL380 Gen11 2U Secondary/Tertiary NEBS-compliant Riser Kit (P48806-B21)
Please refer to the HPE DL380 Gen11 Carrier Grade Conversion documentation on the HPE web site: http://www.hpe.com/services/hpsc
Configuration Information
This section lists some of the steps required to configure a Factory Integrated Model.
To ensure valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
- - Factory Integrated Models must start with a CTO Server.
- - FIO indicates that this option is only available as a factory installable option.
- Some options may not be integrated at the factory. Contact your local sales representative for additional information
Step 1: Base Configuration
The below CTO server model, denoted with “NC” in the SKU description, provides flexibility in the networking choice and require a network adapter from the “HPE Networking” section be selected.
| Networking Choice CTO Server Models | HPE ProLiant DL380 Gen11 - Carrier Grade Supplement 8SFF NC CTO Server |
|---|---|
| SKU Number | P52534-B21 |
| TAA SKU* | P52534-B21#GTA |
| HPE Trusted Supply Chain | P36394-B21 – Optional |
| Processor | Not included as standard |
| DIMM Slots | 32-DIMM slots |
| Storage Controller | Embedded SW RAID with 14 SATA ports (12-ports accessible), optional choice of HPE modular MegaRAID controller. |
| Drive Cage - available | 8 SFF (8SFF U.3 x1) |
| Network Controller | Choice of either OCP 3.0 or select stand-up network adapters for primary networking selection plus additional/optional stand-up network adapters. Notes: No embedded networking |
| Fans | 4-Standard |
| Management | HPE iLO with Intelligent Provisioning (standard), iLO Advanced and OneView (optional) |
| USB | 4x 3.0 standard plus iLO front service port |
Step 2: Choose Required Options
Please select up to two processors required below.
| Step 2a: Choose Processors Processor Option Kits | |
| 4th Generation Intel® Xeon®-Platinum | |
| Intel® Xeon®-Platinum 9462 2.7GHz 32-core 350W Processor for HPE Intel® Xeon®-Platinum 8458P 2.7GHz 44-core 350W Processor for HPE Intel® Xeon®-Platinum 8460Y+ 2.0GHz 40-core 300W Processor for HPE Intel® Xeon®-Platinum 8452Y 2.0GHz 36-core 300W Processor for HPE | P49645-B21 P49632-B21 P49604-B21 P49616-B21 |
| 4th Generation Intel® Xeon®-Gold | |
| Intel® Xeon®-Gold 6448H 2.4GHz 32-core 250W Processor for HPE Intel® Xeon®-Gold 6448Y 2.1GHz 32-core 225W Processor for HPE Intel® Xeon®-Gold 6442Y 2.6GHz 24-core 225W Processor for HPE Intel® Xeon®-Gold 6438N 2.0GHz 32-core 205W Processor for HPE Intel® Xeon®-Gold 6438Y+ 2.0GHz 32-core 205W Processor for HPE Intel® Xeon®-Gold 6430 2.1GHz 32-core 270W Processor for HPE Intel® Xeon®-Gold 6426Y 2.5GHz 16-core 185W Processor for HPE Intel® Xeon®-Gold 6454S 2.2GHz 32-core 270W Processor for HPE Intel® Xeon®-Gold 6421N 1.8GHz 32-core 185W Processor for HPE | P49622-B21 P49600-B21 P49599-B21 P49638-B21 P49615-B21 P49614-B21 P49598-B21 P49654-B21 P49641-B21 |
| Notes: This is a single socket CPU, max allowed = 1 | |
| Intel® Xeon®-Gold 6418H 2.1GHz 24-core 185W Processor for HPE Intel® Xeon®-Gold 6416H 2.2GHz 18-core 165W Processor for HPE Intel® Xeon®-Gold 6414U 2.0GHz 32-core 250W Processor for HPE | P49621-B21 P49620-B21 P49619-B21 |
| Notes: This is a single socket CPU, max allowed = 1 | |
| Intel® Xeon®-Gold 5416S 2.0GHz 16-core 150W Processor for HPE Intel® Xeon®-Gold 5418N 1.8GHz 24-core 165W Processor for HPE Intel® Xeon®-Gold 5418Y 2.0GHz 24-core 185W Processor for HPE Intel® Xeon®-Gold 5420+ 2.0GHz 28-core 205W Processor for HPE Intel® Xeon®-Gold 5411N 1.9GHz 24-core 165W Processor for HPE | P49653-B21 P49640-B21 P49612-B21 P49613-B21 P49639-B21 |
| Notes: This is a single socket CPU, max allowed = 1 | |
| 4th Generation Intel® Xeon®-Silver | |
| Intel® Xeon®-Silver 4410Y 2.0GHz 12-core 150W Processor for HPE Intel® Xeon®-Silver 4416+ 2.0GHz 20-core 165W Processor for HPE | P49610-B21 P49611-B21 |
| 4th Generation Intel® Xeon®-Bronze | |
| Intel® Xeon®-Bronze 3408U 1.8GHz 8-core 125W Processor for HPE | P49617-B21 |
| Notes: This is a single socket CPU, max allowed = 1 | |
| Step 2b: Choose Memory Options Please select one or more memory from below. For new Gen11 memory population rule whitepaper and optimal memory performance guidelines, please go to: For details on the HPE Server Memory Options Population Rules, please go to: Memory population rules for HPE Gen11 servers with 4th Generation Intel Scalable Processors Notes: Please consult with the HPE server QuickSpecs or your HPE representative if you have any questions regarding memory compatibility with a specific HPE server configuration. | |
| Registered DIMMs DDR5 (RDIMMs) | |
| HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit HPE 32GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit HPE 64GB (1x64GB) Dual Rank x4 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit | P43322-B21 P43328-B21 P43331-B21 |
| Notes: Mixing of x4 and x8 memory is not allowed. | |
| Memory Blank Kit | |
| HPE DDR4 DIMM Blank Kit | P07818-B21 |
| Notes: DIMM Blanks are optional and not required. | |
| Step 2c: Choose Power Supplies Select one or two power supplies from below. Notes: Mixing of 2 different power supplies is NOT allowed. | |
| HPE Flex Slot Power Supplies | |
| HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit HPE 1600W -48VDC Power Cable Lug Kit | P38997-B21 P17023-B21 P03178-B21 P38995-B21 P36877-B21 |
| Notes: - Select a minimum (1), maximum (2) power supplies. - Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: https://poweradvisorext.it.hpe.com/?Page=Index . - Mixing Power Supplies is not supported. | |
Additional Options
HPE Unique Options
| HPE ProLiant DL380/DL560 Gen11 2U Rear Serial Port Cable Kit HPE ProLiant DL380 Gen11 System Insight Display Kit | P48824-B21 P48819-B21 |
HPE Optical Drives
| HPE 9.5mm SATA DVD-ROM Optical Drive HPE 9.5mm SATA DVD-RW Optical Drive | 726536-B21 726537-B21 |
Media Bay Kits
| HPE ProLiant DL380 Gen11 SFF Universal Media Bay Kit Notes: The HPE DL380 Gen11 Universal Media bay provides front Display Port and 2xUSB 2.0 | P50728-B21 |
HPE Hard Disk Drives
| HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD HPE 900GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD HPE 600GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD HPE 600GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD HPE 300GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD | P28352-B21 P53562-B21 P28586-B21 P40432-B21 P53560-B21 P53561-B21 P28028-B21 P40430-B21 P28610-B21 |
SSD Selection
| For SSD selection guidance, please visit https://ssd.hpe.com/ | |
| Read Intensive - 24G SAS - SFF - Solid State Drives | |
| HPE 3.84TB SAS 24G Read Intensive SFF BC Multi Vendor SSD HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD | P49035-B21 P49031-B21 P49029-B21 |
| Read Intensive - 12G SAS - SFF - Solid State Drives | |
| HPE 7.68TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD HPE 3.84TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD | P40509-B21 P40508-B21 P40507-B21 P40506-B21 |
| Mixed Use - 24G SAS - SFF - Solid State Drives | |
| HPE 3.2TB SAS 24G Mixed Use SFF BC Multi Vendor SSD HPE 1.6TB SAS 24G Mixed Use SFF BC Multi Vendor SSD HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD | P49053-B21 P49049-B21 P49047-B21 |
| Mixed Use - 12G SAS - SFF - Solid State Drives | |
| HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD | P40512-B21 P40511-B21 P40510-B21 |
| Read Intensive - 6G SATA - SFF - Solid State Drives | |
| HPE 7.68TB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 3.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD | P40501-B21 P40500-B21 P40499-B21 P40497-B21 P40498-B21 P40496-B21 |
| Mixed Use - 6G SATA - SFF - Solid State Drives | |
| HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD | P40505-B21 P40504-B21 P40503-B21 P40502-B21 |
| Read Intensive - NVMe - SFF - Solid State Drives | |
| HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD | P50219-B21 P50216-B21 |
| Mixed Use - NVMe - SFF | |
| HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD HPE 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD HPE 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD | P50227-B21 P50230-B21 P50233-B21 |
Hard Drive Blank Kits
| HPE Small Form Factor Hard Drive Blank Kit | 666987-B21 |
| Hard Drive Cage Kits | |
| HPE ProLiant DL380 Gen11 2U 8SFF x1 Tri-Mode U.3 Drive Cage Kit HPE ProLiant DL380 Gen11 8SFF U.3 Premium Drive Cage Kit HPE ProLiant DL380 Gen11 SFF Universal Media Bay Kit | P48813-B21 P48814-B21 P50728-B21 |
HPE Networking
| 1 Gigabit Ethernet adapters | |
| Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE Intel® I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE | P51178-B21 P21106-B21 |
| 10 Gigabit Ethernet adapters | |
| Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE | P26253-B21 P26259-B21 |
| 25 Gigabit Ethernet adapters | |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Intel® E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Intel® E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE | P26264-B21 P26262-B21 P08443-B21 P08458-B21 P42044-B21 |
| 100 Gigabit Ethernet Adapters | |
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE Intel® E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE | P25960-B21 P21112-B21 |
| OCP 3.0 Adapters | |
| Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE Intel® I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE Intel® E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Intel® E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE | P51181-B21 P08449-B21 P10097-B21 P10106-B21 P42041-B21 P22767-B21 |
| OCP 3.0 Enablement | |
| HPE ProLiant DL360 Gen11 CPU1 to OCP2 x8 Enablement Kit HPE ProLiant DL3XX Gen11 OCP1 x16 Enablement Kit HPE ProLiant DL3XX Gen11 CPU2 to OCP2 x8 Enablement Kit | P51911-B21 P48827-B21 P48830-B21 |
HPE InfiniBand
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter | P23665-B21 P23666-B21 |
HPE I/O Expansion Options
| HPE ProLiant DL380 Gen11 2U Primary/Secondary NEBS-compliant Riser Kit | P48805-B21 |
| Notes: - This riser kit can be used as the Primary riser or the Secondary riser. - Slot 1 or slot 4 - PCIe 5.0 x8 Full Height and Full Length - Slot 2 or slot 5 - PCIe 5.0 x16 Full Height and Full Length - Slot 3 or slot 6 - PCIe 5.0 x8 Full Height and Half Length - When this riser is selected it replaces the default Primary Riser. - When Primary and Secondary NEBS risers are selected the Tertiary Riser cannot be selected. -NEBS risers cannot be mixed with other non-NEBS risers. | |
| HPE ProLiant DL380 Gen11 2U Secondary/Tertiary NEBS-compliant Riser Kit | P48806-B21 |
| Notes: - This riser kit includes the secondary riser and the tertiary riser. - Slot 4 - PCIe 5.0 x8 Full Height and Full Length - Slot 5 - PCIe 5.0 x16 Full Height and Full Length - Slot 6 - PCIe 5.0 x8 Full Height and Half Length - Slot 7 - PCIe 5.0 x16 Full Height and Full Length - Slot 8 - PCIe 5.0 x16 Full Height and Full Length - This riser requires selection of a second processor. - When Primary and Secondary NEBS risers are selected the Tertiary Riser cannot be selected. -NEBS risers cannot be mixed with other non-NEBS risers. | |
HPE Cooling Options
| HPE ProLiant DL380/DL560 Gen11 2U High Performance Fan Kit HPE ProLiant DL380/DL560 Gen11 High Performance 2U Heat Sink Kit | P48820-B21 P48818-B21 |
HPE Security
| HPE Gen11 2U Bezel Kit | P050400-B21 |
HPE Storage Controllers
The Gen11 storage controller portfolio has been updated to include new technology like OCP3.0 as well as PCIe adapters.. For a more detailed breakout of the available Gen11 controllers visit the storage controllers QuickSpecs site:
| HPE Tri-Mode Controllers | |
| HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller Notes: Requires x16 riser slot | P47777-B21 P47781-B21 P47785-B21 P47789-B21 P58335-B21 P47184-B21 |
| Essential RAID Controllers | |
| HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller | 804398-B21 |
HPE Cable Options
| HPE ProLiant DL360 Gen11 Storage Controller Enablement Cable Kit HPE ProLiant DL380 Gen11 8SFF OROC1/2 x2 Cable Kit HPE ProLiant DL380 Gen11 Tri-Mode Splitter Cable Kit | P48918-B21 P48829-B21 P48832-B21 |
Optional Upgrades
| HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit | P01366-B21 P02377-B21 |
| Notes: Provides backup power for multiple HPE storage controllers or other devices. | |
Easy Install Rail Kits
Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.
To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative.
Notes:
- Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
- HPE rail kits are designed to work with HPE racks in compliance with industry standard EIA-310-E. In the event a customer elects to purchase a third-party rack for use with an HPE rail kit, any such use is at customer’s own risk. HPE makes no express or implied warranties with respect to such third-party racks and specifically disclaims any implied warranties of merchantability and fitness for a particular purpose. Furthermore, HPE has no obligation and assumes no liability for the materials, design, specifications, installation, safety, and compatibility of any such third-party racks with any rail kits, including HPE rail kits.
| HPE ProLiant DL3XX Gen11 Easy Install Rail 3 Kit | P52341-B21 |
| Notes: Does not include Cable Management Arm (CMA) (P22020-B21). | |
| HPE DL38X Gen10 Plus 2U Cable Management Arm for Rail Kit | P22020-B21 |
Summary of Changes
| Date | Version History | Action | Description of Change |
|---|---|---|---|
| 10-Nov-2025 | Changed | Configuration Information and Additional Options sections were updated. | |
| Removed | Midline – 12G SAS, Midline – 6G SATA SFF Drives OBS SKUs, 200 Gigabit Ethernet Adapters OBS SKUs and HPE InfiniBand obsolete SKUs. | ||
| 06-May-2024 | Changed | Additional Options section was updated | |
| 04-Mar-2024 | Changed | Configuration Information and Additional Options sections were updated | |
| 06-Nov-2023 | New | New QuickSpecs |
© Copyright 2025 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel® Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of companies.
a50007020enw, 17130 - Worldwide - V4 - 10-November-2025