Skip to main content

HPE Edgeline EL8000 Converged Edge System QuickSpecs

Have feedback on QuickSpecs? We’re listening

Table of Contents

Table of Contents

    The HPE Edgeline EL8000 Converged Edge System brings high-performance computing to the edge of networks, where large volumes of data are being generated but compute capability to get quick insights has traditionally been very limited.


    The rugged size, weight, and power (SWaP) optimized design of the HPE Edgeline EL8000 delivers new efficiency and creates new business models in domains such as telecommunications, manufacturing, defense, automotive or energy.

    Overview

    The Edgeline EL8000 System with ProLiant e910 and e920 Series Server Blades expands the reach of Machine Learning, Video Analytics, and Multi-Access Edge Compute. The compute capacity previously limited to traditional data centers or the cloud is now available at the Edge, close to where the data is generated.


    HPE Edgeline EL8000 Converged Edge System enables data-intensive, low-latency compute, based on open standards and advanced remote manageability


    The HPE Edgeline EL8000 Converged Edge System is designed to help communication service providers (CSP) capitalize on data-intensive, low-latency services for media delivery, connected mobility, and smart cities. The new system enables CSPs to process vast amounts of data in real time directly at the edge, based on open standards to boost flexibility and reduce costs.


    To deliver new services that tap into this massive growth of real-time data, CSPs must transform their telecommunications network edge towards standard IT systems and software-defined architectures, such as virtual radio access networks (vRAN), Multi-Access Edge Compute (MEC), and virtual cable modem termination systems (vCMTS). The open-standards based HPE Edgeline EL8000 Converged Edge System was therefore developed as a cost effective replacement for CSPs’ current proprietary edge systems, with enhanced performance and versatility for data-intensive real-time digital services.


    Additionally, the HPE Edgeline EL8000 Converged Edge System’s unique design delivers high performance and ultra-low latency for the most demanding use cases, including media streaming, IoT, artificial intelligence, and video analytics, in a compact and ruggedized form factor, equipped with edge-optimized serviceability and remote systems management. It shortens the time taken to make an enterprise IT system ready for deployment, provides access at the edge to the same applications used in the core and consequently accelerates the agility of defense, law enforcement and civilian agencies.


    The compact and rugged design of the HPE Edgeline EL8000 Converged Edge System allows deployment of traditional datacenter software applications in hostile Edge environments

    Compliant with industry standards, such as NEBS, M, IL-STD-810G, and ASHRAE class 3 and 4, the system is resistant against hazardous environmental influences like heat, shock and vibration, as well as failover, supporting continuous operation between 0°C to 55°C.


    The single-socket design, equipped with high-end Intel® Xeon® Scalable Processors, reduces latency and energy consumption. System components can be combined, scaled and hot-swapped to meet changing demands, supporting, among others, NVIDIA® Tesla® GPUs, FPGAs from Intel, NICs from Intel or Mellanox.

    With a range of depth and width options for blades and chassis, the system can be flexibly configured and scaled to meet new or changing use-case requirements.


    Data center class security, device and remote systems management

    The HPE proven HPE iLO 5 technology and the Edgeline Chassis Manager enable remote provisioning, ongoing system health monitoring, updates, management and security of HPE Edgeline EL8000 Converged Edge Systems from cell towers to oil rigs, without needing IT expertise on site.

    IMAGE 1
    IMAGE 2

    One or two optional 10GbE unmanaged switches can be installed for in-chassis aggregation of network traffic from the compute blades.


    One 10GbE port from each e910 compute blade can be routed to the switch and terminates in a single external SFP+ uplink (see diagram below). Each e910 compute blade in the chassis must be configured with the correct network riser (RJ-45 or SFP+), so one 10GbE ports are routed to each switch bay. If a QSFP+ network riser is configured on any e910 blade, there will be no network connection from that blade to either switch.


    The switch design is based on Broadcom’s BCM53406 ASIC. (ASIC specs)


    Currently, the only default features supported are:


    Notes: ProLiant e910 blades configured with the QSFP+ network riser option are not connected to the switch bays. Appropriate selection of RJ45 or SFP+ network risers on all e910 blades is required to use the chassis switching capability.

    Standard Features

    Enclosure


    EL8000 5U Front Cabling Chassis

    The HPE Edgeline EL8000 Chassis supports the following ProLiant Server Blade configuration


    Server Blade Configurations

    • – ProLiant e910 1U Blade Server (Min: 1, Max: 4)
    • – ProLiant e910 2U Blade Server (Min: 1, Max: 2)
    • – ProLiant e920 Blade Server (Min: 1, Max: 4)
    • – ProLiant e920d Blade Server (Min: 1, Max: 2)

    Notes:

    – Mixing of ProLiant e910 1U and 2U blades within the same EL8000 Chassis is allowed (i.e. 2 e910 1U blades and 1 e910 2U blade)

    – Mixing of ProLiant e920 and e920d blades within the same EL8000 Chassis is allowed (i.e. 2 e920 blades and 1 e920d blade)

    – Please visit the e910 QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=a00067735enw

    – Please visit the e920 QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/psnow/doc/a50002588enw.pdf?jumpid=in_pdp-psnow-qs

    – Please visit the e920d QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/psnow/doc/a50002589enw.pdf?jumpid=in_pdp-psnow-qs

    – Blades supported on the Edgeline EL1000 and EL4000 systems will not fit in an Edgeline EL8000, and vice versa.


    The HPE Edgeline EL8000 System is rated for extended operating temperatures of up to 55°C, which allows it to be located in environments unsuitable for traditional servers. It is also compliant with ASHRAE Class A3 and A4 specifications.


    Acoustic Noise Specs

    Listed are the sound power levels and average bystander position sound pressure levels when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

    • – EL8000 has the following sound power levels: 62 dBA at low speeds of 10%-20% PWM, and 95 dBA at full speed.
    • – It has the following averaged bystander sound pressure levels (office environment): 58 dBA at 30%, and 89 dBA at full speed.

    Configuration

    Declared Sound Power Level, LWAD (Bels)

    Declared Sound Pressure Level, LPAM (dBA) (Bystander Position)


    Idle

    Operating

    Idle

    Operating

    Entry Config (ee9101U)

    5.9

    6.2

    42

    45

    Base Config (e910 1U)

    6.3

    6.3

    46

    46

    Perf Config (e910 1U)

    6.9

    6.9

    51

    51

    Entry Config (e910 2U)

    7.2

    7.2

    54

    54

    Base Config (e910 2U)

    7.6

    7.6

    58

    58

    Perf Config (e910 2U)

    7.7

    7.7

    60

    60

    HPE EL8000 Systems Power Supply

    The HPE Edgeline EL8000 Systems supports redundant hot-plug power supplies


    EL8000 5U Front Cabling Chassis

    • – HPE Edgeline EL8000 Front Cabling Chassis 1500W 264VAC Power Supply Kit
    • – HPE Edgeline EL8000 Front Cabling Chassis 1500W -48VDC Power Supply Kit

    Notes:

    – Min: 1, Max: 2

    – Mixing of AC and DC power supply options in a chassis is allowed


    Embedded Management

    The HPE ProLiant e910 and e920 SeriesBlade Servers plugged into an HPE Edgeline EL8000 has its own iLO 5 management processor, which can be accessed directly through the management network port on the Edgeline Chassis Manager module.


    The HPE Edgeline EL8000 System has an Edgeline Chassis Controller to monitor and control common chassis elements. The iLO 5 on the server blade communicates with the Edgeline Chassis Controller to gather and report status information on the chassis itself.


    Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

    Learn more at http://www.hpe.com/info/ilo.


    HPE NEBS Enablement Kit

    Telecom equipment is frequently deployed in tough environments, and must be able to continuously sustain operating temperatures up to 55 degrees Celsius without performance degradation or downtime. The Edgeline EL8000 system accomplishes this through a unique thermal design, curated components and intelligent software-controlled fans. In addition, it is designed to meet specifications such as NEBS Level 3 that require tolerance of power feed outages (e.g. 10ms main power drop-out before backup power can be restored), and seismic conditions (e.g. continuing to remain operational after it is subject to equivalent of a 7 to 8 Richter scale earthquake).


    The NEBS enablement kit is a factory option that configures system to operate up to 63C ambient temperature to meet NEBS requirements. If this option is ordered, switches are configured within the blade and chassis to select temperature thresholds and fan parameters that deliver optimal cooling for NEBS environments. Additional fan speed options can also be selected using the BIOS ROM based setup utility:

    • – Optimal Cooling – default
    • – Increased Cooling – fans operate at a higher minimum speed, and cooling thresholds are 5C lower than typical
    • – Enhanced CPU Cooling – CPU cooling thresholds are 8C lower than typical
    • – Max Cooling – fans always operate at maximum speed

    Service and Support

    For the most up-to-date information on HPE Services, please refer to the HPE Services – Supplemental QuickSpecs, which provides a comprehensive and regularly updated overview of available services.


    HPE Service Pack for Edgeline

    The HPE Service Pack for Edgeline is the delivery mechanism for firmware updates on the HPE Edgeline System. Before using your system for the first time, verify that you have the latest drivers, firmware, and system software installed. Update your system with the HPE Service Pack for Edgeline.


    For more information, see the HPE Service Pack for Edgelineon the Hewlett Packard Enterprise website: https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-14e4e074402c43cf

    Configuration Information

    This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.


    Factory Integrated Models must start with an HPE Edgeline EL8000 System with the following minimum configuration:

    • – One (1) HPE ProLiant e910 or e920 Series Server Blade. One (1) HPE Edgeline EL8000 Power Supply

    Step 1: Base Configuration (Choose System)


    HPE Edgeline System


    Description

    SKU

    HPE Edgeline EL8000 5U Configure-to-order Front Cabling Chassis

    P12379-B21

    Notes: The Edgeline EL8000 chassis includes the Edgeline Chassis Manager (ECM) module. Wireless communication capability on the ECM has been disabled and the 2 antenna ports on the bezel are currently non-functional.


    Power Supplies


    HPE Flex Slot Power Supplies (Min: 1, Max: 2)


    Description

    SKU

    HPE Edgeline EL8000 1500W 264VAC Front Cabling Power Supply Kit

    P11290-B21

    HPE Edgeline EL8000 1500W -48VDC Front Cabling Power Supply Kit

    P11291-B21

    HPE Edgeline 1500W 264VAC Titanium Power Supply Kit

    P42206-B21

    Notes:

    – The Titanium Power Supply Kit (P42206-B21) is available in the EMEA region only and does not support the Ultralife Carry On Enclosure.

    – Functional systems require at least 1 power supply to be configured, with 2 power supplies recommended for redundancy

    – Mixing of AC (P11290-B21) and DC (P11291-B21) power supplies in a chassis is allowed.

    – The AC power supply (P11290-B21) supports a nominal input of 100-240Vac. Refer to the appendix for technical details.

    – European Union ErP Lot 9 Regulation: Beginning on January 1st, 2024, the EU's Lot 9 eco-design regulations for supservers and storage products will enforce minimum efficiency for AC power supplies: 94% for multi-output and 96% for single-output. HPE Edgeline power supplies that meet Lot 9 requirements is: Titanium Power Supply Kit (P42206-B21). HPE configurators are already informing users about the mandate for units going to the European Union (EU), European Economic Area (EEA), the United Kingdom, Ireland, Switzerland, or Turkey to comply with Lot 9 minimum efficiencies that begin on January 1st, 2024. HPE will start enforcing Lot 9 minimum efficiency for AC power supplies on November 6th, 2023; purchase orders placed on or after this date that include AC power supplies that aren't Lot 9 compatible will need rework to replace them.

    Step 2: Configure Chassis Storage Option


    HPE Edgeline EL8000 Storage Bay Option (Min: 0, Max: 1)


    Description

    SKU

    HPE Edgeline EL8000 8SFF SAS/SATA Drive Bay

    P17293-B21

    HPE Edgeline EL8000 Storage FIO Enablement Kit

    P22510-B21

    Notes:

    – The Storage FIO enablement kit is required for EL8000 chassis to fit the Drive Bay option. This enablement kit is only available as a factory option and cannot be ordered standalone.

    – The Drive Bay can be ordered as a standalone option to fit into an existing “storage enabled” EL8000 chassis. But if the EL8000 was NOT originally ordered with the storage enablement from the factory, it will NOT fit the Drive Bay option.

    – Selecting the Drive Bay option will restrict choice of servers in the chassis to One (1) e910 2U or e920d blade. The Drive Bay contains a Smart Array controller that is directly attached to this e910 2U or e920d blade.


    HPE Edgeline EL8000 Smart Array P408i-p SR SAS FIO Cable Kit

    P22493-B21

    Notes: The Smart Array controller option must be selected if the Storage Bay (P17293-B21) is selected.


    HPE Edgeline EL8000 Storage Bay Drives (Min: 0, Max: 8)


    Description

    SKU

    HPE 3.84TB SAS 12G Read Intensive SFF SC Multi Vendor SSD

    P49034-B21

    HPE 15.36TB SAS 12G Read Intensive SFF SC Multi Vendor SSD

    P49044-B21

    Notes:

    – Selection of SFF drives requires the configuration of the Drive Bay option in the chassis.

    – Maximum Storage Bay capacity is 122.4TB when configured with Eight (8) 15.36TB SSDs.


    Step 3: Configure Chassis Networking Options


    HPE 10GbE Unmanaged Switch (Min: 0, Max: 2)


    Description

    SKU

    HPE Edgeline EL8000 10GbE SFP+ Switch

    P17297-B21

    Notes:

    – Unmanaged Ethernet switch that takes one 10GbE port from each compute blade (i.e. from 4 1U bays) and switches it to one external 10GbE SFP+ uplink. Adding a second switch to the chassis provides a connection to the second 10GbE port from each compute blade.

    – The e910 blades in the chassis must be configured with either the SFP+ or RJ45 network riser option. If the QSFP+ network riser is used, the blade will NOT connect its 10GbE ports to the switch bays Please refer to the e910 QuickSpecs for details.


    Step 4: Configure ProLiant Server Blade


    Notes:

    – Refer to the e910 and e920 Series Server Blades QuickSpecs for blade configuration details:

    – Please visit the e910 QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=a00067735enw

    – Please visit the e920 QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/psnow/doc/a50002588enw.pdf?jumpid=in_pdp-psnow-qs

    – Please visit the e920d QuickSpecs at the following URL for detailed information and configuration possibilities

    https://www.hpe.com/psnow/doc/a50002589enw.pdf?jumpid=in_pdp-psnow-qs

    HPE ProLiant Server Blade (Min: 1, Max: 4)


    Description

    SKU

    HPE Edgeline e920 Configure-to-order Blade Server

    P40891-B21

    HPE Edgeline e920d Configure-to-order Blade Server

    P40892-B21

    Notes:

    – If the Drive Bay option (P17293-B21) is selected, only One (1) e910 2U blade or e920d blade can be ordered. No e910 1U or e920 blades are supported in this configuration.

    – Maximum of Four (4) e910 1U or e920 blades, or Two (2) e910 2U or e920d blades, or a combination adding to 4U total height is allowed. Each blade operates independently.

    – Mixing of 1U and 2U Blade Servers is allowed (e.g. 2 e910 1U with 1 e910 2U in a chassis or 2 e920 with 1 e920d in a chassis)

    Step 5: Configure Additional Options


    Choose additional options for Factory Integration from sections below


    Additional Options

    Rail Kit


    Description

    SKU

    HPE Edgeline EL8000 4-post Rack Rail and Tray Kit

    P12773-B21

    Notes: The Rack Rail and Tray Kit is designed to support Two (2) EL8000 Chassis’ side-by-side within a standard 5U rack height


    HPE NEBS Enablement FIO Kit


    Notes: The NEBS FIO enablement kit configures the blade thermal behavior to meet Network Equipment Building System (NEBS) environmental specification. It is only available as a factory option.

    HPE Power Cords


    Description

    SKU

    HPE C15 EU 250V 10Amp 2.5m Black Power Cord

    Q7F45A

    HPE C15 UK 250V 10Amp 2.5m Black Power Cord

    Q7F46A

    HPE Edgeline C15 125V 15Amp Black 2.5m US Power Cord

    P41626-B21

    HPE C15 US 250V 10Amp 2.5m Black Jumper Cord

    Q7F57A

    HPE C15 EU 250V 10Amp 0.76m Black Jumper Cord

    Q7F60A

    HPE C15 US 250V 10Amp 1m Black Jumper Cord

    Q7F61A

    HPE C15 EU 250V 10Amp 1m Black Jumper Cord

    Q7F62A

    HPE Edgeline 300V 3m DC Power Cable Kit

    P27698-B21

    HPE Security


    Description

    SKU

    HPE Edgeline EL8000 Trusted Supply Chain FIO Configuration

    P45076-B21

    Notes: HPE Trusted Supply Chain (P45076-B21) is an optional security upgrade intended for agencies and regulated industries needing enhanced security and compliance needs. Applying this option to an e920 or e920d CTO server blade ensures it is built in the USA in a secured facility by vetted HPE personnel assigned to the manufacturing processes. A multitude of checkpoints/inspections for malicious microcode and counterfeit parts are performed throughout the server build, and additional safeguards are put in place against cyber-exploits throughout the server lifecycle. The e920 and e920d server blades are currently supported in the USA, exclusively, and is Trade Agreement Act (TAA) compliant.

    HPE iLO Common Password FIO Setting

    P08040-B21

    Notes: Replaces iLO default randomized password by an HPE defined common password. HPE highly recommends changing this password immediately after the initial onboarding process. Customers who want to choose their own custom iLO default password should use the HPE Factory Express Integration Services. Learn more at: http://www.hpe.com/security

    HPE Support Services


    Tech Care


    Installation & Startup Services


    Description

    SKU

    HPE Installation Edgeline 8000 Chassis Service

    HF8S4E

    HPE Installation Startup Edgeline EL8000s Service

    U8JA4E

    Notes: For a full listing of support services available for this server, please visit https://ssc.hpe.com/


    Storage

    HPE EL8000 Storage Bay

    The optional Storage Bay can be configured in the EL8000 chassis and requires the following components to be ordered:

    • – Drive Bay kit
    • Hosts up to 8 Small Form-Factor (SFF) drives for up to 122TB of storage when fully configured with 15.3TB SSDs. All drives are hot-swappable. The drive bay kit can be ordered as a standalone option for EL8000 chassis which have been storage enabled (see storage enablement FIO option below). It can also be removed and re-installed in the field to facilitate quick data transfer or swap, as long as the adjoining e910 2U or e920d blade has been powered down.
    • – Storage Enablement FIO option
    • Configures the EL8000 chassis to connect the Drive Bay to an e910 2U or e920d blade in the same chassis. This option is only orderable from the factory, and an EL8000 not configured with this kit cannot fit a Drive Bay.
    • – Smart Array option kit
    • Installed inside the drive bay and connects to the 8 SFF drives. It also connects to the PCIe interface of a e910 2U or e920d blade. All the standard Smart Array management, availability and security features are available.
    • – ProLiant e910 2U and e920d blades
    • These are the blades version supporting the drive bay, and the appropriate Storage Enabled Left Riser PCIe I/O option must be selected. The ProLiant e9101U and e920 don’t support the drive bay option.

    Notes:

    – Prior to removing the Storage Bay from the chassis, ensure that the adjoining ProLiant e910 2U or e920dblade has been powered down.

    – The Storage Bay and its Smart Array controller are dedicated to the adjoining ProLiant e910 2U or e920d blade. If a ProLiant e910 1U or e920 blade is installed, the Storage Bay will not be accessible.


    IMAGE 3

    Technical Specifications

    Power Supply Specifications

    Murata (MPS) D1U54P-W-1500-12-HCxTC

    HPE Edgeline EL8000 1500W 264VAC Front Cabling Power Supply Kit

    P11290-B21



    Input Voltage Range (Vrms)

    100-240 Nominal (90-264 range)



    Frequency Range (Nominal)

    (Hz)

    50-60 nominal (47-63 range)



    Nominal Input Voltage (Vrms)

    90-100 (100)

    110-120 (115)

    200-240 (240)

    Maximum Rated Output

    Wattage Safety (Watts)

    1260

    1500

    1500

    Nominal Input Current (Arms)

    14.1

    14.5

    6.9

    Maximum Rated Input Wattage Rated (Watts)

    1394

    1646

    1636

    Maximum Rated VA (Volt-Amp)

    1410

    1668

    1656

    Efficiency ( % )

    90.4

    91.1

    91.7

    Power Factor

    0.9886

    0.9868

    0.9879

    Leakage Current ( mA ); max as per safety files

    0.94mA; 264V; 60Hz



    Maximum Inrush Current

    (A peak )

    <15Apk, 264Vac cold start



    Maximum Inrush Current duration

    ( ms )

    <2ms



    Maximum British Thermal Unit

    Rating ( BTU-Hr )

    4757

    5651

    5582

    Murata (MPS) D1U54-D-1500-12-HCxC

    HPE Edgeline EL8000 1500W - 48VDC Front Cabling Power

    Supply Kit

    P11291-B21



    Input Voltage Range (VDC )

    -40 to -72



    Frequency Range (Nominal)

    (Hz)

    DC



    Nominal Input Voltage (VDC )

    -40

    -48

    -72

    Maximum Rated Output

    Wattage Rating (Watts)

    1500

    1500

    1500

    Nominal Input Current

    (A DC); 12V/133A; 3.3/6A

    45.5

    38.1

    24.8

    Maximum Input Wattage Rating (Watts)

    1856

    1828

    1786

    Maximum VA (Volt-Amp)

    1856

    1828

    1786

    Efficiency (%)

    88.4

    89.7

    91.9

    Power Factor

    N/A



    Leakage Current (mA)

    N/A



    Maximum Inrush Current (A peak); 72VDC; fulload

    <20



    Maximum Inrush Current duration (ms)

    <30



    Maximum British Thermal Unit Rating (BTU-Hr)

    6333

    6337

    6094

    Physical Dimensions

    • – Chassis Dimensions (H x W x D):
    • Height 8.442" (5U) (21.442 cm), Width 8.442" (22.3 cm), Depth 18.173" (46.16 cm).
    • Notes: Installed on the rack tray option kit, the unit occupies 5U of rack space and half rack width.
    • – Storage Bay Dimensions (H x W x D)
    • Height 3.3” (8.3 cm) x Width 8.4” (21.3 cm) x Depth 13.4” (33.9 cm)
    • – Weight
    • 50 lbs to 58 lbs (22.7 kg- 26.3 kg)
    • Notes: Depending on the configuration. Max weight for fully loaded storage bay
    • – Power
      • Typical: 1400W
      • Maximum: 3000W

    Notes: With power supply redundancy and “typical” is estimated for a fully loaded EL8000 with 4 e910 1U server blades.

    System Inlet Temperature

    • – Extended Operating
    • Depending on hardware configuration, the supported system inlet range can be extended up to 55°C. Compliance to ASHRAE A3 and A4 standards is also available.
    • Notes: The approved extended temperature hardware configurations for this system are listed in the appendix.
    • – Standard Operating
    • 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000ft) above sea level to a maximum of 3050m (10,000ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options
    • installed.
    • Notes: When configured with certain server models, a fan fault when operating above 30°C (86°F) may reduce system performance. Refer to the appendix for details.
    • – Non-Operating
    • -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

    Relative Humidity

    • – Operating
    • Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8% relative humidity. Maximum to be the lower (less moisture) of 24°C (75.2°F) dew point or 90% relative humidity
    • – Non-Operating
    • 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

    Altitude

    • – Operating
    • 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
    • – Non-Operating
    • 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)

    Emissions Classification (EMC)

    • – FCC Rating
    • Class A
    • – Normative Standards
    • CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; K22;K24; EN61000-3-2; EN 61000-3-3; EN 60950-1; IEC60950-1
    • Notes: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

    Hewlett Packard Enterprise Extended Ambient Operating Temperature Support

    The American Society of Heating Refrigeration and Air-Conditioning Engineers set standards for building systems, energy efficiency, indoor air quality, refrigeration and sustainability. The ASHRAE A3 and A4 classes are the latest classes that have been defined in an effort to support the Fresh Air Data cooling initiative. Hewlett Packard Enterprise Extended Ambient Operating Support is defined below as comparable to an ASHRAE class. For selected system configurations the Hewlett Packard Enterprise Edgeline Extended Ambient Operating Support allows operation even beyond ASHRAE class.

    Notes: Actual allowable system operating temperature will be determined by the options (I/O cards, drives etc.) selected. Details are provided in the Edgeline system configuration tables for the desired operating environment shown below.


    The following table provides a summary of environmental ranges supported, with altitude de-ratings, by Hewlett Packard Enterprise ProLiant servers. Items in bold are ProLiant features that exceed the ASHRAE comparable class feature set.

    Extended Ambient Operating Support Specification


    Dry bulb temp range (°C)

    Relative humidity range (%RH)

    Dew point limits (°C)

    Maximum altitude

    Altitude de-rating*

    Standard Operating

    10°C to 35°C

    (50°F to 95°F)

    8% to 90%

    -12°C (min) to

    24°C (max)

    3050 meters

    1.8°C/305m

    above sea level

    Extended Ambient 40°C

    Operating (ASHRAE Class

    A3 compliant)

    5°C to 40°C

    (41°F to 104°F)

    8% to 90%

    -12°C (min) to

    24°C (max)

    3050 meters

    1.0°C/175m

    above 900m

    Extended Ambient 45°C

    Operating (ASHRAE Class

    A4 compliant)

    5°C to 45°C

    (41°F to 113°F)

    8% to 90%

    -12°C (min) to

    24°C (max)

    3050 meters

    1.0°C/125m

    above 900m

    Extended Edgeline

    Ambient 55°C Operating

    0°C to 55°C

    (32°F to 131°F)

    8% to 90%

    -12°C (min) to

    24°C (max)

    3050 meters

    1.8°C/305m

    above sea level

    Notes:

    – *Altitude de-rating assumes no direct sustained sunlight

    – The maximum rate of change for Inlet Ambient Temperature is 20°C/hr (36°F/hr). The upper limit and rate of change can be limited by the type and number of options selected.

    Hewlett Packard Enterprise Operating Support

    Component

    Support Status

    Type

    Standard

    Extended Ambient

    Extended Ambient

    Extended Edgeline Ambient

    Operating Support

    10°C to 35°C

    40°C

    (ASHRAE Class A3 compliant)

    45°C

    (ASHRAE Class A4 compliant)

    55°C

    Base System

    Supported

    Supported

    Supported

    Supported 1

    Fans

    Supported with Redundancy

    Supported with Redundancy

    Supported with Redundancy 2

    Supported with Redundancy 2

    SATA M.2

    Supported

    Supported

    Supported

    Supported

    NVMe M.2

    Supported

    Supported

    Supported

    Supported with exceptions4

    PCIe I/O Cards

    Supported 3

    Supported 3

    Supported 3

    Supported 3

    Notes:

    – 1Near 55°C inlet ambient AND when the CPU is stressed at 100%.

    – 2Upon fan failure the servers in the system may reduce performance

    – 3Only HPE PCIe options cards were used in this testing

    MIL-STD-810G

    The Edgeline EL8000 complies to these environmental specifications.


    Method

    Procedures

    Notes

    Altitude Storage

    500.5

    I

    40Kft

    Altitude Operation

    500.5

    II

    15Kft

    Altitude Operation

    500.5

    III

    8Kft/40Kft

    High Temp Storage

    501.5

    I

    +85°C

    High Temp Operation

    501.5

    II

    +55°C

    High Temp Tactical Standby

    501.5

    III

    +60°C

    Low Temp Storage

    502.5

    I

    -55°C

    Low Temp Operation

    502.5

    II

    -40°C

    Humidity

    507.5

    II

    95%, 10 cycles

    Summary of Changes

    Date

    Version History

    Action

    Description of Change

    21-Sep-2026

    Changed

    QuickSpecs maintenance updates.

    Removed

    Obsolete or not supported SKUs removed - P49028-B21, P49030-B21, P49039-B21

    01-Dec-2025

    Changed

    New branding applied to document.

    02-Sep-2025

    Changed

    QS Survey link added

    28-Apr-2025

    Changed

    Configuration Information section was updated.

    21-Jan-2025

    Changed

    Configuration Information section was updated.

    Updated the Titanium Power Supply Kit.

    Obsolete SKUs were updated

    16-Sep-2024

    Changed

    URL updated.

    19-Aug-2024

    Changed

    Service and Support section was updated.

    06-May-2024

    Changed

    Configuration Information and Technical Specifications sections were updated.

    04-Dec-2023

    Changed

    Service and Support section was updated.

    20-Nov-2023

    Changed

    Service and Support and Additional Options (HPE Security) sections were updated.

    07-Aug-2023

    Changed

    Configuration Information section was updated (Power Supplies)

    10-Jul-2023

    Changed

    Technical Specifications section was updated (MIL-STD-810G)

    17-Apr-2023

    Changed

    Overview, Configuration Information, Technical Specifications sections were updated.

    Extended Ambient Operating Temperature Support added.

    07-Nov-2022

    Changed

    Configuration Information section was updated

    05-Jul-2022

    Changed

    Configuration Information section was updated

    Storage Bay Drives were updated

    Obsolete SKUs were removed

    07-Mar-2022

    Changed

    Overview, Standard Features, Configuration Information, Storage and Technical Specifications sections were updated

    EL8000 Chassis storage bay enablement updated

    Updated e910, e920, and e920d server blade options

    Update the Storage Bay Drives

    01-Nov-2021

    Changed

    Configuration Information section was updated.

    Added e920 and e920d server blade options

    15-Sep-2021

    Changed

    Obsolete SKU was removed.

    Services and Support Pointnext Tech Care and Complete Care information added

    07-Jun-2021

    Changed

    Additional Options section was updated

    15-Mar-2021

    Changed

    Added MIL-STD-810G tests. Clarified storage bay ordering.

    07-Dec-2020

    Changed

    Standard Features, Configuration Information, and Additional Options sections were updated.

    01-Jun-2020

    Changed

    Rebranding applied to QuickSpecs

    04-May-2020

    Changed

    Overview, Standard Features, Configuration Information, and Additional Options sections were updated.

    17-Feb-2020

    Changed

    Overview, Standard Features, Configuration Information, and Additional Options sections were updated.

    03-Feb-2020

    Changed

    Standard Features, Configuration Information, and Additional Options sections were updated.

    06-Jan-2020

    Changed

    Overview and Configuration Information sections were updated.

    02-Dec-2019

    Changed

    Standard Features section was updated.

    07-Oct-2019

    Changed

    Technical Specifications section was updated.

    19-Aug-2019

    Changed

    Name changed and sections were updated.

    05-Aug-2019

    New

    New QuickSpecs

    Recommended for you