Edgeline Systems


Technical Specifications

High-density compute nodes

  • One to Four HPE ProLiant Server Cartridges Supports HPE ProLiant m510 (Intel® Xeon® D – 8 or 16 cores each) and HPE ProLiant m710x (Intel® Xeon® E3 - 4 core with workstation-class GPU) compute nodes

Built-in I/O

  • Two switched 10 Gb (SFP+) or two pass-through 4x10 Gb (QSFP+) Ethernet ports Four USB 3.0 ports (one per server) HPE iLO4 enterprise-class management processor with a dedicated RJ45 network port


  • Three to five Solid State Drive (SSD) slots on each compute node. Choose from cost effective SATA SSDs or high performance NVMe SSDs, for up to 4TB total capacity External storage via PCIe add-in I/O cards (e.g. FC SAN) iSCSI with RDMA over Ethernet (RoCE) capability (when supported by compute node for data volume only, not boot)

Mechanical and power

  • Chassis Dimensions: 43mm (1.69 inch) tall, 435mm (17.13 inch) wide, 615mm (24.21 inch) deep. Fits within 1U in a standard 19 inch rack. Weight: Approximately 14 KG (30.9 lbs) Standard Rack (with Cable Management Arm) or Wall-mount Typical: 400-600W, Maximum: 800W AC supply: 95-265 VAC input, 800 Watts DC supply: -48 VDC input, 800 Watts High Efficiency 1+1 Redundant Power

Environmental, shock and vibration

  • Extended operating temperature from 0°C up to 55°C (0°F up to 131°F) (depending on configuration), Storage -30 to 60°C (-22°F to 140°F) 95% non-condensing humidity Operating Shock, IEC 60068-2-27, 30G half-sine, 11ms duration Operating Vibration, IEC 60068-2-64, 3Grms random 5 ~ 500 Hz one hour per axis

Expansion slots

  • Four full-height half-length (FHHL) PCIe x8 cards (physical x16 slot) of up to 50W each (one per compute node) -or- Four PXIe modules (one to four assignable to each compute node)


  • 3-Year Parts, 3-Year Labor, 3-Year Onsite support
  • *
    Price may vary based on local reseller.