Display Boot Configuration Information

Introduction the the xtcli command.

Use the xtcli command to display the configuration information for the primary and backup boot nodes, the primary and backup SDB nodes, and the cpio path.

Display boot configuration information for the entire system

crayadm@smw> xtcli boot_cfg show
Network topology: class 2
=== xtcli_boot_cfg ===
[boot]: c0-0c0s0n1:ready,c0-0c0s0n1:ready
[sdb]: c1-0c0s1n1:ready
[cpio_path]: /tmp/boot/kernel.cpio_5.2.14-wGPFS

Display boot configuration information for one partition in a system

crayadm@smw> xtcli part_cfg show pN

Where pN is the partition number. p0 is always the whole system.