Managing chassis power and resetting Moonshot CM 2.0

Prerequisites

Role: Administrator or Operator with chassis access

Procedure
  1. Click Power and Thermal in the navigation tree, and then click the Management Power tab.
  2. To reset the Moonshot CM 2.0, click Reset Moonshot CM 2.0, and then click Reset.
    Using the Reset option does not make any configuration changes, but ends all active connections to the firmware. If a firmware file upload is in progress, it is terminated. If a firmware flash is in progress, you cannot reset until the process is finished. Wait a few minutes before attempting to log in to a new session.
  3. To reset the chassis manager power supply, click Auxiliary Power Reset, and then click Auxiliary Reset.
    Resetting the chassis manager power supply resets all chassis manager components, including the Ethernet switch connection to the blade iLO processors. An auxiliary reset causes a short disruption to the internal management and production networks, but does not affect blade power.